Build the print around your finish
Compare raised-print grades, then trial the film build and flexibility.
Browse English TDSCompare high-density printing grades
Compare full selection notes & source limitations
Compare the individual handbook entries and download the relevant English sheet. Reported properties retain their test-method and application limitations.
| Product | Process | Selection notes | Document |
|---|---|---|---|
| YR-03 Footwear High-Density Clear | Screen printing / finish | The source describes fast build, hydrolysis resistance and printing workability. | Download PDF |
| YR-05 Footwear High-Density Paste | Screen printing / finish | The source describes fast build, hydrolysis resistance and printing workability. | Download PDF |
| YR-19 Footwear High-Density Paste | Screen printing / finish | The source describes fast build and hydrolysis resistance. The parameter table explicitly states that this grade is not yellowing resistant. | Download PDF |
| YR-01A Footwear High-Density Paste | Screen printing / finish | The source describes transparency, yellowing resistance, fast build and hydrolysis resistance. | Download PDF |
| YR-WPU Recoatable Semi-Matte Topcoat | Screen printing / finish | The source distinguishes this recoatable grade from the full-matte and high-gloss entries. | Download PDF |
| YR-WPU Non-Recoatable Full-Matte Topcoat | Screen printing / finish | This entry is explicitly described as non-recoatable; verify the complete layer sequence. | Download PDF |
| YR-WPU High-Gloss Clear Topcoat | Screen printing / finish | The title identifies a high-gloss clear; confirm the exact grade because other source wording also mentions matte material. | Download PDF |
Confirm the current exact-grade instructions and test conditions before production.
Browse all English technical sheetsApplication guidance, handling & ordering details
Product Series / Model: HR / H37D / HY-T / HY-5 / HY-5B / W37-G2
A raised print must work with the shoe upper as it flexes. The factory range includes soft, elastic, transparent and other high-density products. Selecting the visual effect is only one step: basecoat adhesion, deposited layers and final conditioning also need evaluation.
Product options and suitable applications
| Series / category | Product type | Selection note |
|---|---|---|
| HR | Water-based soft high-density product | Soft-effect candidate. |
| H37D / HY-T | Water-based high-density products | Discuss the required heat and flex test. |
| HY-5 / HY-5B | Water-based high-density products | Specify the target build and finish. |
| W37-G2 | Water-based transparent high-density product | Confirm the required transparency and construction. |
What matters in a trial
- The source separates the basecoat, raised layer and colour stages. Agree the whole construction before comparing trial results.
- The pinhole and bubble cases associate defects with deep mesh structure, the first print deposition and dried material in the screen. Inspect the first layer rather than trying to hide a void with later layers.
- The flex-failure case highlights hardener addition and final conditioning. Obtain the current SOP instead of using one generic drying time for all products.
Technical data and documents
Request the current TDS and SDS for the exact model. Published catalogue properties depend on the product category and evaluation conditions; where the source does not establish a unit or complete test method, contact our technical team.
| Information | How to obtain it |
|---|---|
| Viscosity, application settings and conditioning | Contact our technical team for the exact grade. |
| Pretreatment and compatible products | Confirm against your actual substrate and process. |
| Testing information | Provide the required test method and acceptance criteria. |
Prepare your sample request
Include the substrate name and finish, printing or assembly process, current product and the problem you need to solve. A material offcut and a photograph of the finished construction help us distinguish appearance requirements from interface or flex failures.
Frequently asked questions
Can a thicker deposit alone solve coverage defects?
The source shows that a later layer can conceal a void. Check substrate structure, screen and first-pass deposition.
Which high-density product gives the required effect?
Send a reference appearance and physical test requirement. Softness, transparency and heat exposure require different selection considerations.
Related material and technical guides
Evaluate it on your own material
Send the material type, surface finish, current process and required test. Our technical team can help identify a trial candidate and the appropriate TDS / SDS.